Morton Salt Company Water Softener Unit MSD34C Review

How the Morton Water Softener  Works

Engineered with a space saving, compact design, the Morton System Saver MDS34C is highly efficient with patented “Look Ahead” technology that calculates water used for the 34,000 Grain Demand Initiated Regeneration. This is the second largest water softener model that is offered by the Morton Salt Company and it has earned3.2 out of 5 stars in water softener reviews.

The Morton Salt Company 34M Wtr Softener Unit Msd34c water conditioner is well supported by the manufacturer with free technical assistance, 1 year warranty on parts, and 10 year warranty on tanks (with proof of purchase). With tank and brine container in the same unit, the space saving design is preferable for people with access to only a small space, and Morton Salt Company consistently provides units which use the lowest amounts of salt while softening the water in an effective manner.

If you’d like to head right over to Amazon to check it out, click here!

morton water softner

Specifications

  • Dimensions: Complete unit 18.2 x 13.2 x 48 inches
  • Space Needed: 1.3 square feet needed available
  • Dimensions: Complete unit 18.2 x 13.2 x 48 inches
  • Space Needed: 1.3 square feet needed available
  • Ship Weight: 91 lbs.
  • Salt Capacity: 175 lbs.
  • Water Supply: 110 Grains per Gallon (GPG) maximum hardness
  • In the Box: bypass valve, installation kit, water-hardness test strip, 24-volt transformer, drain hose
  • Type of Salt: Recommends Morton System Saver Salt Pellets, but any brand should work.
CLICK HERE FOR BEST PRICE

Featured Pros and Cons of Morton Unit MSD34C

Pros

  • Uses up to 50% less salt than other brands.
  • Affordably priced at just over $700 including shipping costs. Installation may cost extra.
  • Flexible connectors and “No Sweat” compression fittings allow for fairly easy installation from a novice.
  • Demand Initiated Regeneration (DIR) using “Look Ahead” technology.
  • Battery free power interruption protection for potential power outages.
  • Easy installation for most homeowners. May take about an hour, or could be even less. Some owners do prefer to hire a plumber if they are not as confident with their skills.
  • Easy to use control panel.
  • Whole house water system for all parts of the home.
  • Actual customers report helpful customer service from Morton, with live person on the phone.
  • Bypass valve allows ability to re-route certain sources of water to keep it from being softened.
  • Removes up to 4ppm clear water iron.
  • May be installed outside if protected from the elements or using a special cover.
  • May use potassium chloride as a substitute for salt, for those who are concerned about sodium content in drinking water or environmental impact. (Hardness level may need to be adjusted.)
  • 10 year warranty on salt storage tank and fiberglass mineral tank (with proof of purchase.)
  • 1 year warranty on all parts other than tank—labor is not covered.
CLICK HERE FOR BEST PRICE

Cons

  • Some water softener reviews show a struggle with corrosion under the clear coat across the board of the electronic control panel, which may require part replacement two or three years into usage. If this happens in less than a year then the part will be covered under the warranty.
  • Salt-based regeneration adds potential for brine pollution and there are some communities in the United States that may limit the use/sale of regenerative water softeners. Check with your local community to find out if there are restrictions in your area.
  • Water may feel a bit on the “slimy” side to people who are not accustomed to soft water. Hardness may be adjusted to a certain extent to combat this problem.
  • Salt-softened water may be considered unhealthy for drinking water by some people, particularly those who already have problems with high sodium. A filter on your drinking water may help with this. (Check with your doctor for further information on this and other health concerns about water.)
  • Some water softener reviews show a struggle with corrosion under the clear coat across the board of the electronic control panel, which may require part replacement two or three years into usage. If this happens in less than a year then the part will be covered under the warranty.
  • Salt-based regeneration adds potential for brine pollution and there are some communities in the United States that may limit the use/sale of regenerative water softeners. Check with your local community to find out if there are restrictions in your area.
  • Water may feel a bit on the “slimy” side to people who are not accustomed to soft water. Hardness may be adjusted to a certain extent to combat this problem.
  • Salt-softened water may be considered unhealthy for drinking water by some people, particularly those who already have problems with high sodium. A filter on your drinking water may help with this. (Check with your doctor for further information on this and other health concerns about water.)
  • Some people want the minerals, such as magnesium chloride or manganese in their drinking water for health purposes.
CLICK HERE FOR BEST PRICE

Other Considerations

Although Morton advertises this as something that is “ideal for any size household with high water hardness ratings”, comparing across the board indicates that this one might be useful for a household of 4 or 5 people, but likely not more than that. And there are certainly water softeners on the market today which provide softening capability to a higher degree than the 34,000 GPG of this model.

So although it’s a decent product, Morton may be over-estimating its capacity and you should be aware that this is really much more of a mid-range model rather than the high end the company claims. Regarding the control panel that may fail due to corrosion, some users have tried using a clear coat on the panel prior to installation, creating a more waterproof panel.

Morton is aware of this problem and will replace the panel if within the warranty time period. However, there has been no improvement in the design of this portion of the product in the MSD34C model, so it may be better to take precautions ahead of time to prevent the corrosion from happening in the first place.

Bottom Line for Morton Unit MSD34C

All in all, water softener reviews show that Morton Salt Company’s System Saver MSD34C comes in as a decent unit for an affordable price. Not top of the line, but also not the most expensive, so this one might be a good compromise between the two. With mid-range capacity, high salt efficiency, and Demand Initiated Regeneration (DIR), the MDS34C provides an affordable, fairly reliable option on the water softener market.

Certainly, the company’s support line is a pro for installation and help with the warranty, but there are some risks with the corrosion of the internal electronic control panel. That said, this unit probably uses less salt than any other water softener brand out there—this is particularly interesting considering the fact that it is marketed by a salt company brand!

CLICK HERE FOR BEST PRICE